Version 2.1.3.0 - Added [File only for NG Panel/PCB] setting to the [XML2] tab of the General Setting - Fixed a problem in which the port number could not be set in the [Barcode 2] - [Receive data from CS-Center] in General Setting Version 2.1.1.4 - Added Previous, Next, and Reload buttons to Pcb Status column - Add [Conveyor] tab - Added option to specify barcode format - Added option to rotate the image to be inspected when rotating the Map View picture - Added option to display details of NG contents in the inspection image of 3D inspection machine - Added [List] button to display inspection details of 3D inspection machine - [NG of BlockMark makes judgement of XML output OK] option is added to XML tab - Unified the barcode information for CSV output file name with CSC - Changed so that when the scrap button is pressed, a scrap judgment is made for each child PCB - Changed to limit Classification after Scrap judgment - Support for display of PCB judgment result on the Map View on the screen with A/B Tree View off - Fixed a problem in which the B side was not output in Export when A/B Tree View mode is ON - Fixed an error in Chinese due to not specifying a character code in Classification - Fixed a problem in which inspection programs were not displayed on the data selection window when the inspection - program name was less than 2 characters - Fixed a minor problem in the Map View picture mark drawing Version 2.1.0.0 - Added OK image switching function - Added [Set NG-ID Color] settings - Changed so that the result of PCB is displayed on the result display area at the top of the Map View when the only PCB is displayed - Changed so that the inspection frame is displayed on the NG image for X02W - Standardized the application for the full version and the trial version - Changed XML output to sort PCB barcodes and inspection results by block number - Added [Skip if no RefDes data when moving data] option on A/B Tree View Tab - Changed so that the cross-lines are displayed on the selected side in A/B Tree View mode - Added [Output operator information] option on CSV tab - Fixed a problem that the PCB name was not displayed while switching A/B side on the long board data - Fixed a problem that the file was not recognized as a long board when the long board data was opened through the barcode search - Fixed a problem that an error occurred when loading the settings Version 2.0.0.3 - Supports Bottom 3D Inspection Machine - Fixed a problem that the height of 3D images was not displayed correctly Version 1.4.2.8 - Added Operator Login function ・Added Select Columns function on PCB Status - Added inspection result above Map View (For Dual Inspection Machine only) - Changed display of long PCB data to A1B1/A2B2 - Fixed a problem that prevented the screen from zooming in properly on Display Ref Des Image - Fixed a problem in which Scrap and Warning are not displayed in A/B Tree View - Fixed problem in which data moved for two pieces when a G/NG judgment is made - Fixed a display problem when _A(_B) is present in PCB name on Select Data screen - Fixed a problem that prevented switching when Ref Des on A2 is zero in long PCB - Fixed a problem that A1 was judged when OK is selected in PCB judgement while A2 was selected - Fixed a problem in which barcode searches in the Multi-DB determined that there was no data when the B-side data was found at first - Fixed a problem that reload by clicking Next button did not work after version 1.3.1.3 even if [Auto-reload by clicking Next(grey-out)button at the last PCB] was turned on Version 1.4.2.0 - Addition of option [NG of BlockMark is judged as OK] for CSV output - Addition of option [PCB without barcodes are not output as files] for CSV output - Added a display column for PCB judgment result at the top of the screen - Changed so that A1, A2 (B1, B2) data are merged and output in XML output of Long Board - When [Active A/B Tree View] is ON and only one side of Ref.Des. data is displayed, the result is displayed in the check column after Ref.Des. data judgment is completed - The number of Ref.Des. data saved in the DB is now 64 bits - Fixed a problem that the Next/Previous Ref.Des. buttons may not work when displaying B side in Tree View mode - Fixed a problem that the displayed data and the judgment result of the PCB list may not match in the grid display of Tree View mode - Fixed a problem in which the data was not added to the PCB list when the A side was OK and the B side was NG - Fixed a problem in which data was not moved to B side when data was moved after the judgment of the PCB - Fixed a problem in XML output of Long Boards that the end tag was not output - Fixwd a problem that B side was not deleted when data was deleted in Tree View mode - Fixed a problem in which unjudged PCB on B side were not checked in the Tree View mode when [List unclassified PCB only] was ON - Fixed a problem in which only one model of inspection data with the same PCB name is displayed on the Select Data screen when [Split data per LOT in Select Data list.] is OFF in V1.4.0.1 or later. - Fixed a problem in which a warning message is displayed immediately after file switching when [Alert no Ref Des classification.] is turned on. Version 1.4.1.0 - Program name and inspection machine name are added to CSV output - An option to output each sub-board PCB serial number and inspection result is added to CSV output - Fixed a problem where the drawing of the Map View was not updated in Windows 11 Version 1.4.0.8 - Changed to set default values for unset points when reading NGID setting files - Fixed a problem in which [Split data per LOT in Select Data list.] option was not working on the [Select Data] screen after V1.4.0.5, and data from different lots were not displayed. - corrected according to the special order Version 1.4.0.5 - Added Warning button to judgment - Added option to switch serial number/block number to PCB number in XML output function - Fixed a problem which an error on side A is displayed when switching from side A to side B by using [NG text in new window] in Tree View mode - Fixed a problem which new data is not displayed when pressing the PgDn key in Tree View mode - Fixed an issue where function keys are not disabled when [Disable function key] option is active. Version 1.4.0.0 - Supports up to 256 NG-IDs (0-255) - Modified NG-ID button - Added NG-ID Group Setting screen - Modified to revert to the result before the Repair decision when selecting [Undo] - Changed [Confirm classification befor move to next PCB.] to [Confirm classification when classification is finished.] and Confirmation window is displayed when switching or reloading the file - Changed to be able to move to another data when warning about unjudged data in [Alert no RefDes classification.] - Changed [Load side B Using A side block barcode] to [Load both A and B side data when reading block barcode] - Changed so that when displaying the results of A-side and B-side, the A-side and B-side are also linked by the block barcode - Deal with the special order - Fixed a problem that a some buttons on toolbar were not displayed when [Touch screen buttons] setting was enabled - Fixed a problem that the displayed inspection result was different from the actual result when the grid view of [Activate A/B Tree View] was enabled - Fixed a problem that the error was displayed when double-clicking a good PCB after OK was displayed on the tree view of [Activate A/B Tree View] Version 1.3.0.5 ＜Correction＞ - Corrected XML export problem that xml was outputting different inspected side of pcb when [Load both A and B side data automatically.] option is active. - HASP driver update v7.81-> v8.13 Version 1.3.0.3 ＜Correction＞ - Corrected XML export problem that XML was not exported if the inspection data did not included any blocked cells. - Corrected a problem that Operator name was not displayed on CS-Repair. Version 1.3.0.0 - Permitted special characters when inserting barcodes from USB - Corrected a problem that repairing result data was not cleared while turning individual Ref. Des. data status "Undo" on the main screen. - Corrected a malfunction for RS232C connection. Deal with the special order Version 1.2.6.1 to 1.2.7.9 Add [Lot is Exported] option to [General Settings] - [XML2] tab. Add [First Classified Date] to [PCB Property]. Add Angular camera image saving function while exporting XML. Add a function not to move data without the first time on individual NG judgement. Add a function to export XML though same PCB is checked. Add a function to highlight a block with specified color. Add a function to change size of NG mark on Map View. Add a function to export information of data classified as “Repair” to CSV. Add a function to open CS-Repair doubly. Add a function to display and sort an inspection data by inspected time series. Add a function to quit the software without displaying confirmation message. Change on a pull-down of [User] on main screen : Selected item is registered to RefDes Status and items on [User] is cleared. Change on Reference Designator : Registered User information is cleared when right-clicking a reference data and select [Undo]. NG on Side-B was not displayed when [Use side-A block barcode for Side-B search] option is active and no NG was found on Side-A. [Only the original error message is shown] function did not work on Side-B data while Tree View mode was active. Blocks did not be inverted on Map View Mirror function while [Display more than 10 NG IDs] option on [NG-ID Button] tab was active. Version 1.2.6.1 2019/06/11 In the case of "A / B Tree View", if there is no NG on the A side, it will be an error to judge the B side, so it was corrected. Version 1.2.6.0 2019/05/27 Changed to clear the display when there is no NG image. Version 1.2.5.9 2018/06/21 User display change. Version 1.2.5.8 2019/05/22 Fix "CustomFunction".(for exclusive customer I) Version 1.2.5.7 2019/04/26 Add "mehi" function.(for exclusive customer M) XML is output after the judgment confirmation screen is closed. Changed to output even if there is no block when XML output is made into PCB. Fix "CustomFunction".(for exclusive customer I) Version 1.2.5.6 2019/03/29 Fix got an error in barcode search. Version 1.2.5.5 2019/03/27 Add "Division judgment" function. Add "Client". Version 1.2.5.4 2019/02/21 Fix RS232C communication. Version 1.2.5.3 2018/01/28 Display Date and Barcode in "A/B Tree View - grid" item display. Version 1.2.5.2 2019/01/10 Fix because it crashed during individual enlargement display. Version 1.2.5.1 2018/12/19 Add "Division judgment" function.(for exclusive customer J) Version 1.2.5.0 2018/12/14 Add "Disable function key" function. Version 1.2.4.9 2018/12/05 Improved to overwrite when there is no bar code of XML output (individual) or bar code is same. Fix when "A/B Tree View", XML on B side was not output. Corresponding to frameless image 5M. Add "RS232" to "Setting". Fix the 2nd sort of "Stamp" of "Sort Results" was not working. Version 1.2.4.8 2018/08/02 Add "i" function (for exclusive customer) Version 1.2.4.7 2018/07/06 FIX "Load both A and B side data automatically" and "Display single PCB if PCB-BarCode = Panel-BarCode (PCB = Block in 22x)" are valid When searching for a board without a block bar code, B side is displayed as OK. Version 1.2.4.6 2018/06/21 Add "When Ref Des do not exist Press OK button to process PCBOK" function. Version 1.2.4.5 2018/06/15 Change the order of barcode printing. Fix the "program" of print. Version 1.2.4.4 2018/06/01 Fix defect rate When selecting side B, select the one closest to the inspection date and time of side A. Version 1.2.4.3 2018/05/23 Add message display when saving XML. Fix not to save the same PCB when saving XML. Fix number of defects on data selection screen. Fix "F" function (for exclusive customer) . Version 1.2.4.2 2018/02/28 Add "Do not search PCB bar code" function. Version 1.2.4.1 2017/01/29 Changed English. Add "Receive and display CsCenter message" function. Version 1.2.4.0 2017/12/07 When warning "Alert no Ref Des classification" is valid, warning is displayed when boards with no fault are displayed, so it was fixed. Version 1.2.3.9 2017/11/24 Since "Next" button was not displayed in "A/B Tree View", it was fixed. Version 1.2.3.8 2017/09/05 Move XML output after saving to temporary folder. Version 1.2.3.7 2017/08/29 Modify the Tree View of display screen. Enable to set more than 10 value of NG-ID in "NG classification ID" function. Modify button display when displaying more than 10 NG-ID's. Version 1.2.3.6 2017/07/28 Add "Send Server" function (for exclusive customer) Version 1.2.3.5 2017/07/14 Enable to search listed barcode when both "Load both side A and B automatically" and "Display all PCB including Good PCB" is active. Version 1.2.3.4 2017/07/04 Add "Use Side-A block barcode for Side-B search function". Version 1.2.3.3 2017/06/30 Bug fix to display Side-B block barcode in Tree View. Version 1.2.3.2 2017/06/26 Enable to select folder in "Judgment information is preserved in a file" function (for exclusive customer) Version 1.2.3.1 2017/06/21 Fix judgment of individual board (status_pcb_) was different in XML output. Version 1.2.3.0 2017/06/14 Add "Use 10 key shortcut" Add "Lengthen the cross line of the panoramic picture" Version 1.2.2.9 2017/06/05 The judgment display on side B was Rep because it was corrected. When I switched from B to A, I corrected it because the display was wrong. Fix When "Display grid" is invalid, it was not displayed. Version 1.2.2.8 2017/06/02 Add "Display grid" Add "Do not change edit position when reloading" Add "Use F9 for A side switching and F12 for B side switching" Version 1.2.2.7 2017/05/12 Add "Judgment information is preserved in a file." and "Import" (for exclusive customer) Version 1.2.2.6 2017/04/13 Add the function to display all images of side cameras. Fix the error occurred in "Extract NOTE column" operated with Chinese language. Version 1.2.2.5 2017/03/10 Fix not to send unnecessary data in higher-level communication (forexclusive customer) Version 1.2.2.4 2017/03/06 Compatible to 5M camera Version 1.2.2.3 2017/02/10 Add XML3 output function Fix function to display the latest data of A/B side in barcode search (for exclusive customer) Version 1.2.2.2 2017/02/01 Fix to display B side in Tree View when displaying individual sheet by barcode function Version 1.2.2.1 2017/01/17 Display the latest data of A/B side in barcode search (for exclusive customer) Add function "Set errtype F to -" in XML2 Version 1.2.2.0 2017/01/11 Add password input screen and confirmation screen for transmission (for exclusive customer) Version 1.2.1.9 2016/12/14 Bug fix to show NG picture when searching PCB barcode with activating the function "Display single PCB if PCB-BarCode = Panel-BarCode (PCB = Block in 22x)" Bug fix to show "Repair results". Version 1.2.1.8 2016/12/07 Fix "former_errortype" in XML. Version 1.2.1.7 2016/12/05 Fix to become Symbol when there is no Pin in XML. Add "1002" to wire. (for exclusive customer) Add XML2 in Setting, and add function of "Reference Designator without ( ) and [ ]". Version 1.2.1.6 2016/11/24 Update: If all Symbols are Repair with Repair judgement, XML will output PCB judgement with Repair status. Delete function "When being already judged, XML is also output on the way". Bug fix to show PC name, etc. in dropdown menu even selecting multiple DB. Version 1.2.1.5 2016/11/11 Add function "When being already judged, XML is also output on the way". Update to include False NG in XML output even with NG only. Add "Status_PCB" to XML output. Bug fix not to show all Sheets when both Panel and Sheet has same barcode. Version 1.2.1.4 2016/11/08 Update the date of Result preservation from Inspection date to judgement date. (for exclusive customer) Enlarged the keys of Good, Prev, NG, and Next. Version 1.2.1.3 2016/09/26 If only NG is displayed, BlockMark is deleted from the list when it is NG even other defects are classified as OK Version 1.2.1.2 2016/09/02 Hasp could be recognized by Remote Desktop Version 1.2.1.1 2016/08/19 Add function of "Result preservation" for custom order Version 1.2.1.0 2016/08/09 Update the password for custom order 08/09 Corrected the word from "Startting" to "Starting" at starting window 07/11 Version 1.2.0.9 2016/06/02 Add function for exclusive customer(2016/06/02) Compliant to SpiderEye(2016/04/19) Version 1.2.0.8 2016/04/13 Add file switching function in Symbol totals (for exclusive customer)(2016/04/13) Version 1.2.0.7 2016/03/29 Add the function to print judgement result (for exclusive customer) Version 1.2.0.6 2016/03/10 Add the function of "The number of NG is shown to number of blocks” Version 1.2.0.5 2016/02/02 Change "date" of XML setting(2016/02/02) Change "date", "starttime" and "former_errortype" of XML setting(2016/01/26) Version 1.2.0.4 2015/12/18 New option for XML Pin Pkg Version 1.2.0.3 2015/12/04 OK is displayed in NG pictures if read the NG only PBC by reading the barcode. Version 1.2.0.2 2015/11/25 Compatible to 4M size Version 1.2.0.1 2015/10/30 Original comment was not displayed Version 1.1.9.9 2015/09/24 Add "It is made a check information file display mode" in "Action 2"(2015/09/24) Add "Change barcode" button to tool bar(2015/09/18) Appear "Marantz folder was not able to be created." at startup(2015/09/18) Add "Only an original error sentence is indicated."(2015/09/11) Add "Cross Line" indicate color setting"(2015/09/11) Add "OK Mark" indicate color setting(2015/09/10) Version 1.1.9.8 2015/09/04 Add ',' in barcode input(2015/9/3) Select a distant cell from the edge when there are plural cell images(2015/08/31) Add monitor as sending to Nutek(2015/08/28) Version 1.1.9.7 2015/08/27 Change the string length 33 to 20 and more in "Special setting 1"(2015/08/26) Add contentType to "Send the XML to HTTP server"(2015/08/18) Indicate ICT result as "Hioki"(2015/08/18) Add "special setting 1" as addin(2015/08/07) Version 1.1.9.6 2015/08/03 Change symbol total format 2nd.(2015/08/03) "Send to HTTP server" add in XML(2015/07/17) Change symbol total format(2015/07/16) If "PASS or FAIL is indicated after judgment" of Trace Server is OK and A side then don't display(2015/07/13) Version 1.1.9.5 2015/07/10 Change symbol total format(2015/07/16) Display barcode search separate PCB of separate PCB Version 1.1.9.4 2015/07/02 Add "Send to Nutek" Add "Scrap" button Version 1.1.9.3 2015/06/26 Show angle in Note for AngleCheck stamp Prodrive Version 1.1.9.2 2015/06/18 New function Angle Statistics Version 1.1.9.1 2015/06/09 Flip Map View possible Version 1.1.9.0 2015/05/25 Error at reloading when Map view size is fit to frame in A/B both loading mode PrevNG button was deactivated when clicking Map view Version 1.1.8.9 2015/03/05 Unexpectedly NG and Good was displayed when no OK data but light blue circle was o Version 1.1.8.8 2015/02/24 Option show side A when reading both A/B in Trace Server Mouse down freeze other operation New option in print menu Print button in toolbar Version 1.1.8.7 2014/12/17 Ref Des Status window size not memorized when starting up in maximum size Memorize Pcb Status window size Result update in Tool bar must press with Shift key Barcode scanner not active when showing NG pic in new window Version 1.1.8.6 2014/10/06 When there is ref.des not belonging to Block, the NG statistics be 0 Version 1.1.8.5 2014/10/02 Do not ignore - from USB barcode scanner Version 1.1.8.4 2014/09/16 Possible to classify by keyboard even showing angular camera view Possible to relead by PageDown key (same as clicking Next button in screen at last PCB) Possible to save angular camera image in 4 screen mode Display OK when there is no NG if "List Good PCB too" is active Version 1.1.8.3 2014/08/18 Do not cut trace server (custom setting for exclusive customer) Treat special letters &<>'" in XML Version 1.1.8.2 2014/07/16 Changed some custom made spec(HIOKI) Version 1.1.8.1 2014/07/14 Force to stay the window always in front Version 1.1.8.0 2014/07/09 Changed some custom made spec Version 1.1.7.9 2014/06/18 DB Password possible to set Receiving 16 when trace server correctly responds Version 1.1.7.8 2014/05/28 IC ref.des was not correct for customized display Version 1.1.7.7 2014/04/30 Addin passowrd Reloading not working in customized AB window Side A was displayed when loading side B in customized AB window PCB not displayed in AB window mode by searching Barcode Version 1.1.7.6 2014/04/21 Addin tab Window be white wile startup when window size is maximum and saved in startup Address error to terminate staring (without dongle) Version 1.1.7.5 2014/03/25 Error when there is no operator number in Edit Operator Show message when there is no operator number at adding Operator Reload button be inactive at classifying the last PCB when "List unclassified PCB only" option is active Number of PCB be zero after classifying the last PCB when "List unclassified PCB only" and "Confirm classification before move to next PCB are active Version 1.1.7.4 2014/03/14 Shift data from diastase measurement PostgreSQL log ERROR:relation image_index_ Version 1.1.7.3 2014/02/24 Auto-reload by clicking Nex(grey out) button at the last PCB New Option "Show NG PCB by ficducial reading failure" New Option "List unclassified PCB only" Button layout broken after starting maximum window size Version 1.1.7.2 2014/01/29 Bug by reduce DB data loading time NG pics not shown by switching OK/Good/NG buttons Bug NG not shown after searching by block barcode number Too long warm-up waiting time on PC after 596 hours past after startup New option, Show NG message in new window Version 1.1.7.1 2013/12/20 RefDes Status screen position not memorized Version 1.1.7.0 2013/12/17 Wait (sec) at PC startup Measure angle with side view Version 1.1.6.9 2013/11/07 Rack print update (print barcode too) Version 1.1.6.8 2013/11/06 Improved w x h ration of NG pic window Improved w x h ratio of Map View Tree View test Version 1.1.6.7 2013/10/24 Rack print update Version 1.1.6.6 2013/10/23 Trial for Tree View Version 1.1.6.5 2013/09/18 Print option Rack print option Version 1.1.6.4 2013/09/05 Data was not shown when searching by barcode PC name and date First block was not shown by block barcode search Version 1.1.6.4b 2013/08/21 Display change. First NG Ref.Des is shown after block barcode search instead of showing last NG Ref.Des. Version 1.1.6.3 2013/08/19 More data was loaded if Working Time was set over 12 o'clock. Deactivate up/down arrow key in screen Expand functions in NG pic window Show without frame Version 1.1.6.2 2013/04/01 Data not acquired when end time of Shift is earlier than start time Password to open settings Version 1.1.6.1 2013/03/18 4 views in angular camera screen Keep direction of view45 stamp for angular camera Version 1.1.6.0 2013/01/23 Skips space when reading by USB scanner Freeze after scanning by RS232C scanner in barcode input dialogue Version 1.1.5.9 2012/11/14 Incorrect aspect of NG pic window when showing Good pic Incorrect aspect of NG pic window Version 1.1.5.8 2012/10/23 Show PCB Map corresponding to the month Version 1.1.5.7 2012/10/22 Show the latest PCB Map Version 1.1.5.6 2012/09/04 operator name add for data output Version 1.1.5.5 2012/08/09 operator_ID tag add for XML Version 1.1.5.4 2012/08/03 If Do not save shift data was active, OK PCB wasn't able to classified. Version 1.1.5.3 2012/06/25 If Block No. wasn't sequential from 1, in XML was incorrect If Block No. wasn't sequential, in XML wasn't output Repaired PCB has REP in in XML Repaired symbol has R in in XML Version 1.1.5.2 2012/05/29 Common Ng-ID New barcode parameter Version 1.1.5.1 2012/05/07 "If PCB is occupied, move to next PCB" is active, when there is no new PCB, open by read only When "Display all PCB including Good PCB" is active, OK PCB's status be "-" Version 1.1.5.0 2012/04/25 Show dialogue while searching barcode Bug, when enlarging NG picture window, window size not resizable sometimes Version 1.1.4.9 2012/03/22 XML output incorrect when Block No.1 didn't exist Data possible to pull from multiple DB Version 1.1.4.8 2012/02/20 Window size of NG pic shrinking bug Barcode input dialogue went out of screen XML output incorrect when Block had no barcode Version 1.1.4.7 2012/02/10 New option for side camera, auto window open/close XML output incorrect when Per Panel selected Progress bar stopped on Win7 Side camera view did not close sometimes Version 1.1.4.6 2012/01/12 Function change (sbpg_free_result_array -> sbpg_free_result_str) for memory leakage Version 1.1.4.5 2011/12/28 List side B data too by searching side A block barcode Open/Close Angular Camera Screen automatically Changed File open date Version 1.1.4.4 2011/12/20 Secondary key to sort Reference Designator Version 1.1.4.3 2011/12/14 Clear date and revert to NG when Undo classification Renumbering when changing Currentresult at Ref.Des. classification Bug, color wasn't changed after classifying the last Ref.Des. Version 1.1.4.2 2011/12/06 XML Output for Valor Version 1.1.4.1 2011/11/10 MEK logo Version 1.1.4.1 2011/09/09 Couldn' delete data sometimes Version 1.1.4.0 2011/09/02 New option to use a-z keys Show false NG statics too by pressing Status button in file open menu. Faster startup at error of no DB found Regard person_id 01 for 1 Bug that PCB classification result wasn't shown in Check Bug that Check status was not undo by Undo button for Ref.Des. Version 1.1.3.10b 2011/07/25 NG classification status add in Status button in file open menu. Version 1.1.3.9 2011/07/22 Status(UnCheck) button to show the classification status add in File open menu. New menu to filter barcode searching by AOI Bug false NG was not listed when Hide BlockMark was active and only blue circle (false NG) button was on Version 1.1.3.8 2011/06/27 High light the program selected last time in File open menu Version 1.1.3.7 2011/05/30 From/To date range was inactive when Load A/B was active To date was not active after pressing NG/OK/Good circle button Setting was no inherited after update Version 1.1.3.6 2011/04/22 Add function to show Cell images Improved that sometimes dialogue went behind Version 1.1.3.5 2011/03/04 Stamp add to selection to sort reference designator Memorize the sort order of file selection Open by recent file Enable to switch language from UI Version 1.1.3.4 2011/01/05 Improved that position and size of NG pic was not memorized when using multiple monitors Version 1.1.3.3 2010/12/09 Did not correctly displayed if all operator was deleted on list Localized Version 1.1.3.2 2010/10/14 AOI Operator Help for Windows7 New Installer Version 1.1.3.1 2010/10/12 Bug-fix that repair/classification result was not saved Version 1.1.3.0 2010/09/14 Selection to show/hide BlockMark Enable to change font side for Barcode/PC name/Data name Add Barcode/PC name/Data name Save side camera images Version 1.1.2.4 2010/09/07 Enable to use with multiple monitor Version 1.1.2.3 2010/03/18 Display Extract condition Version 1.1.2.2 2010/03/12 Improved phenomenon that loading got slower and slower Version 1.1.2.1 2010/02/03 Memorize position of barcode dialogue Improved speed when displaying Stg1 Warm-up when starting Version 1.1.2.0 2009/12/17 New icon Version 1.1.1.3 2009/11/25 Add function to save list in CSV Add Zoom/non-Zoom switch button to measure components Improved bug that side B was not hit when searching by barcode Add function to measure angle Classification button was enabled when checking OK PCB, error message shown Version 1.1.1.2 2009/10/09 Enable to set more than 1 DB Version 1.1.1.1 2009/09/14 Handle increases when checking Hasp Version 1.1.1.0 2009/07/17 data output did not work on build greater than 090608 Version 1.1.0.11 2009/06/26 When selecting multi, PCB position be highest when inspecting panel barcode was disabled Panel barcode not changed when clicking map Error when treating more than 10 panels Version 1.1.0.10 2009/06/23 PCB position be highest when inspecting panel barcode Version 1.1.0.8 2009/05/27 Enable result more than 255 AM/PM hides something Version 1.1.0.7 2009/05/18 Repair result sometimes not displayed Version 1.1.0.6 2009/05/12 Repair result incorrect Version 1.1.0.5 2009/05/08 Start-up enabled OK data not found by barcode Version 1.1.0.4 2009/04/14 Display panel barcode Setting save, loading add Version 1.1.0.3 2009/04/06 If Lot is disable, calculation was wrong Comment for Cell was not displayed. Version 1.1.0.2 2009/03/27 If per Lot is disable, PCB with Lot num. is disregarded Version 1.1.0.1 2009/03/25 pixel vs mm localized Bug:NG pic when pressing Ctrl+N Version 1.1.0.0 2009/03/19 Released as V1.1 Version 1.0.1.3 2009/03/17 Display position in screen Shortcut for PCB Map zoom Start in external display Version 1.0.1.2 2009/03/11 Add Lot for file open Add data for file open Add clear for file open Open after searching Display SPI in file open Measure NG picture No menu when no NG picture Scroll PCB map when zoomed NG picture comes top when enlarging PCB map Bug: if do not clear mark is on, cross does not move Operator import/export add Version 1.0.1.1 2009/02/18 Zoomed PCB map image quality too low Add date in About..for trial version Version 1.0.0.24 2009/01/26 F not input by classifying NG pic from popup menu Version 1.0.0.23 2009/01/22 Operator Edit form change Version 1.0.0.22 2009/01/07 Barcode input improved Version 1.0.0.22 2009/01/06 Enlarge button Version 1.0.0.22 2008/12/25 Rack barcode Version 1.0.0.21 2008/12/16 Memorize barcode Version 1.0.0.21 2008/12/04 Buttons move when enlarging Open Search speed faster No error when searching barcode on side A when PCB has A/B side Windows go behind for a second when searching barcode Memorize window size, sort setting Version 1.0.0.20 2008/12/03 Date not be today Version 1.0.0.19 2008/11/21 OK when no defect on both A/B side Light blue circle displayed when OK barcode (when no OK, no list) Update only side A from Watch Encoding error when first line of NgId is null Set item when drop down Version 1.0.0.18 2008/11/19 Send update data to CsWat Version 1.0.0.17 2008/11/12 Barcode search not displayed when there is only A data but A/B display is on. OK display when barcode search ColWidths[7] change per row Version 1.0.0.16 2008/10/28 Unable to change operator Version 1.0.0.15 2008/10/22 Bug in barcode search Version 1.0.0.14 2008/10/21 Select operator from operator edit menu Keep zoomed PCB map after switching side A and B Do not use BarcodeInDlg for barcode input Version 1.0.0.13 2008/09/30 Barcode to be latest, not working, was using time from 22x Add NG pic size and PCB map size for Window initialize Ngid unicode Version 1.0.0.12 2008/09/04 Display stamp name in Note Enable zooming of PCB map Do not list SPI data IndexOf is slow Version 1.0.0.11 Changing capture screen by spliter, if height of width is 0, then exception happens Bug: displayed stamp name in parts name area because of : Version 1.0.0.10 2008/07/23 Unless check on Send XY data, (* *) is not transferred Version 1.0.0.9 2008/07/23 Be free the capture window Version 1.0.0.8 2008/07/10 Bug: if select search right after starting, invalid data to convert data is dispalyed. Add display OK data too Version 1.0.0.7 2008/07/02 Add str4. Crash when reading unexpecting barcode USB barcode enable (If FormKeyPress 5-30, then barcode) Version 1.0.0.6 2008/06/24 Add number for sorting If there is :, then start display from : Version 1.0.0.5 2008/05/27 Add display by Total PCBs Capture list not created because odd letter used for PCB name (lot_num 0x03) Version 1.0.0.4 2008/05/22 Switch AB side in Map View Add capture list Version 1.0.0.3 2008/02/20 Width for 2 screens Move to next after lock PageUp PageDown moves too much Index error arrow keys not displayed correctly (English OS) Version 1.0.0.0 2008/02/06